Assembly - Ryobi P240 Manual Del Operador

KNOW YOUR RIGHT ANGLE DRILL-DRIVER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
KEYLESS CHUCK
Your drill-driver has a keyless chuck that allows you to
hand tighten or release drill bit in the chuck jaws.
VARIABLE SPEED
The variable speed switch trigger on your drill-driver delivers
higher speed with increased trigger pressure. Speed is
controlled by the amount of switch trigger depression.
SWITCH LOCK
The switch trigger can be locked in the OFF position. This
feature helps reduce the possibility of accidental starting
when not in use.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
3/8 in. Right Angle Drill-Driver with Swiveling Battery Base
Double-ended Bits (2)
Operator's Manual
All manuals and user guides at all-guides.com
FEATURES

ASSEMBLY

8
FORWARD/REVERSE SELECTOR
(DIRECTION OF ROTATION SELECTOR)
Your drill-driver has a forward/reverse selector located
above the switch trigger.
BIT STORAGE
When not in use, bits provided with your drill-driver can be
placed in the storage area located on the base of the
motor housing.
RIGHT ANGLE DESIGN
The drill-driver's right angle head design allows you to get
into tight work areas for drilling and driving.
SWIVELING BATTERY FOOT
The drill-driver's swiveling battery foot design positions the
battery pack in the most convenient location.
WARNING:
If any parts are missing or damaged do not operate this
tool until the missing parts are replaced. Failure to do so
could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.