Troubleshooting Of Minor Faults; Possible Cause - Bosch Nexxt 800 Serie Manual De Operación, Cuidado Y Instrucciones Para La Instalación

Troubleshooting of Minor Faults

d WARNING
TO AVOID
RISK OF ELECTRIC SHOCK!
Repairs should only be carried out
by an authorized technician.
Fault
The door cannot be The door cannot be
opened. opened.
Door cannot be opened,
even though the appliance even though the appliance
has been switched off and
on again.
Program continues running,
even though the appliance
has been switched off and
on again.
Appliance cannot be
operated. "Child lock
activated" as indicated in
the display field.
Control lights do not light Control lights do not light
up. up.
Program does not start.
Start/Pause indicator light
flashes.
Program does not start.
"Check Door !" indicated in
the display field.
Program does not start.
"Real Time delay" is
indicated in the display
field.
Clock cannot be set.
"Set clock:" text remains in
the display field even
though the Menu button
has been pressed.
24
All manuals and user guides at all-guides.com
If repairs are necessary, and you
cannot eliminate the fault yourself with
the aid of the following table:
Turn the program selector to Off.
q
Disconnect the washing machine
q
from the power outlet.
Turn off the water taps.
q
Call Customer Service
q
(refer to Page 27).

Possible cause

Child lock activated.
Power failure.
Program is running and/or the door is locked for safety
reasons.
Plug is loose or not inserted.
Program selector turned to Off before end of program.
Child lock activated.
For safety reasons the door has been locked because the
water level, temperature or drum speed is too high.
Child lock activated.
Child lock activated.
A fuse has blown. A fuse has blown.
Power failure.
Start/Pause button not pressed.
Door not closed properly.
End time selected and activated.
Program has already started; when a program has
started, the clock cannot be set.
The setting has switched from hours to minutes; both
selection points have the same text.
Action
Deactivate child lock; (see Page 20)
An interrupted program will be resumed when power is
restored. If the laundry is to be removed during a power
failure, call Customer Service (refer to Page 27).
Wait until the program ends (see Page 21).
Eliminate the cause.
Select a program.
Deactivate child lock (see Page 20).
See "Adding to the laundry/Interrupting the program",
Page 21 .
Deactivate child lock (see Page 20).
Deactivate child lock (see Page 20).
Reset circuit breaker.
Call Customer Service if this fault recurs.
An interrupted program will be resumed when power is
restored. If the laundry is to be removed during a power
failure, call Customer Service (see page 27).
Press the Start/Pause button.
Check whether laundry is trapped in door.
Close the door (a click should be heard).
Program continues.
None. Appliance starts automatically.
Wait until program ends.
None.