Custom Program; Understanding The Control Panel (Hde/Hdg5000Aw,Chde/Chdg5000Aw) - Haier HDE5000AW Manual Para El Usuario E Instrucciones De Instalación

English

Custom Program: (12)

• This allows you to save a favorite cycle,set the desired settings and touch
"custom program"button for 3 seconds. A beep will sound to indicate the
cycle has been saved.
To recall your custom cycle ,touch the "custom program"button before drying
a load.
To change the saved cycle,set the desired settings and "custom program"button
for 3 seconds.
You can also program Anti-Bacterial, Wrinkle Saver and Damp Dry Signal.
Touch custom program and touch start/pause button to activate.
Status Indicator: (13)
- Child Lock: You can lock the controls to prevent any selections from being
made.Or you can lock the controls after you have started a cycle.
Children cannot accidentally start the dryer by touching pads
with this option selected.
To lock the dryer,touch and hold "Damp Dry Signal"for 3 seconds.
Asingle beep tone is heard and Child Lock is glow.To unlock the
dryer,touch and hold the "Damp Dry Signal"for 3 seconds.
- Check Filter:
- Dry:
When lit this indicates the process the cycle is currently in.
- Cool Down:
Understanding the Control Panel
HDE/HDG5000AW
1
NOTE: Features may vary per model.
Power On/Off Button: (1)
• Press the button to power on the dryer. To power off press button again.
Cycle Selection:
• S e e l t c from the Auto Dry cycles (Bulky Items, Heavy, White, Normal, Delicate
and Press Free) or Manual Dry cycles (Touch Up, Timed Dry, Rack Dry or
Speed Dry).
27
All manuals and user guides at all-guides.com
After the power button is touched,the check filter indicator could
flashes until Start/Pause is selected.
This is a reminder to clean the lint filter before the dry
program starts.
When lit this indicates the process the cycle is currently in.
4
2
3
(2)
12
13
5 6 9 7
English
13
11
8 10