Status Indicator - Haier HDE5000AW Manual Para El Usuario E Instrucciones De Instalación

English
Custom Program: (11)
• This allows you to save a favorite cycle,set the desired settings and touch press
"custom program"button for 3 seconds. A beep will sound to indicate the
cycle has been saved.
To recall your custom cycle ,press the "custom program"button before drying
a load.
To change the saved cycle,set the desired settings and "custom program"button
for 3 seconds.
You can also program Anti-Bacterial, Wrinkle Saver and Damp Dry Signal.
Press custom program and press start/pause button to activate.
Digital Display
• Indicates the remaining time (min) during cycle operation.
Note: If the dryer has any problems, it will display an error message.

Status Indicator: (13)

- Child Lock: You can lock the controls to prevent any selections from being
made.Or you can lock the controls after you have started a cycle.
Children cannot accidentally start the dryer by touching pads
with this option selected.
To lock the dryer,press and hold "Damp Dry Signal"for 3 seconds.
Asingle beep tone is heard and Child Lock is glow.To unlock the
dryer,press and hold the "Damp Dry Signal"for 3 seconds.
- Check Filter:
- Dry: When lit this indicates the process the cycle is currently in.
- Cool Down:
29
All manuals and user guides at all-guides.com
(12)
After the power button is pressed,the check filter indicator could
flashes until Start/Pause is selected.
This is a reminder to clean the lint filter before the dry
program starts.
When lit this indicates the process the cycle is currently in.