Haier HDE5000AW Manual Para El Usuario E Instrucciones De Instalación página 15

All manuals and user guides at all-guides.com
5. Lay the door on a soft surface to protect
the door surface with the glass facing up,
remove the 8 screws using the power drill
holding hinge cover and strike
panel. (Fig 4)
6. Remove the hinge cover, then remove
the 8 screws which hold the hinge knots
"B" "T". (Fig 5 and Fig 6)
Fig. 5
Fig. 6B
NOTE: If hinge knots (T & B) are not properly placed the
hinge cover may not align with the door.
Fig. 4
Hinge Cover
Fig. 6A
English
Strike Panel
14