Loading The Washer; Washer Care; Cleaning - Midea MLH45N1AWW Manual Del Propietario & Instrucciones De Instalación

LOADING THE WASHER

Wash drum may be fully loaded with loosely added items. Do not wash
fabrics containing flammable materials (waxes, cleaning fluids, etc.).
To add items after washer has started, press
is unlocked. The washer may take up to 30 seconds to unlock the door
after pressing
Do not try to force open the door when it is locked.
After the door unlocks, open gently. Add items, close the door and press
to restart.

WASHER CARE

CLEANING

EXTERIOR
Immediately wipe off any spills. Wipe with damp cloth. Do not hit surface
with sharp objects.
INTERIOR
To clean the interior of the washer, select the Tub Clean feature on the
control panel. This Tub Clean cycle should be performed, at a minimum,
once per month. This cycle will use more water, in addition to bleach, to
control the rate at which soils and detergents may accumulate in your
washer.
NOTE: Read the instructions below completely before starting the Tub
Clean cycle.
1. Remove any garments or objects from the washer and ensure the
washer basket is empty.
2. Open the washer door and pour one cup or 250 ml of liquid bleach or
other washing machine cleaner into the basket.
3. Close the door and select the Tub Clean cycle. Push the
button.
4. When the Tub Clean cycle is working, the display will show the
estimated cycle time remaining. The cycle will complete in about
90 minutes. Do not interrupt the cycle.
24
depending on the machine conditions.
and wait until the door