4. „- -" appears in the display followed by the number of tracks.
Press the II PLAY/PAUSE button (13) in order to play the
CD. The CD will play from the fi rst title.
5. By lightly pressing either the
tons (8/12) you can jump one track forwards or backwards. If
the button is held down while you are listening to a track you
can search for a particular piece of music
(I
SKIP- = reverse,
6. In order to remove a CD, press the
(7), open the CD compartment and lift the CD out carefully.
Always keep the CD deck closed.
NOTE:
•
If a disc has been incorrectly inserted „- -" fl ashes and „Er"
(error) appears in the display.
•
If no disc has been inserted „- -" fl ashes and „no" appears
in the display.
•
Playback of CDs produced by the user cannot be guaran-
teed due to the large variety of software and CD media
available.
Description of the CD buttons
II PLAY/PAUSE (13) (play/pause)
With the CD running:
You can briefl y interrupt and resume playback using this button.
The symbol PLAY fl ashes in the display. Pressing again
continues playback.
I
SKIP- (12) (reverse search)
With the CD running:
Press once =
This starts the current track again from the
beginning.
Press twice =
This jumps back to the previous track.
Press three times = This plays the song before etc. If the button
is kept pressed down, the machine starts to
search through the tracks.
I SKIP+ (8) (forward search)
With the CD running:
With this button you can jump to the following track or the next
track but one etc. If the button is kept pressed down, the machi-
ne starts to search through the tracks.
REPEAT (11)
Press once =
(the REPEAT emits a fi xed light) the current
track is repeated continuously.
Press twice =
(the REPEAT ALL emits a fi xed light) the
whole CD is played continuously.
Press three times = all functions are cancelled. The normal play
mode is resumed.
05-SR 777 CD.indd 27
05-SR 777 CD.indd 27
All manuals and user guides at all-guides.com
RANDOM (10)
Press once =
I SKIP+/I
SKIP- but-
Press twice =
I SKIP+ = forwards).
STOP (stop) button
Programmed Play with the PROGRAM Button
This can be used to program any desired sequence of tracks.
1. Press the
2. Press the PROGRAM button (9). „MEMORY 01" (memory
3. Select the next track with the
4. Press the II PLAY/PAUSE button (13). The playback starts.
5. Press once the
6. To resume the playback of the program press fi rst the PRO-
7. In order to delete the programme, press the PROGRAM but-
The device stops automatically once the entire sequence of
programmed tracks is completed. The programmed order of
tracks remains in the memory until you change to a different
mode, remove the CD from the CD compartment or switch off
the device.
It is possible to combine the programmed tracks with the repeat
function. After you have programmed and started the device,
please press the REPEAT button (11) up to three times and then
you can use the functions as described under „REPEAT".
Please note these instructions for playing back CDs and
CDRs in MP3 format! The device is not able to play back
MP3 fi les. The CD begins to turn, but the sound cannot
be heard.
the display contains the word RANDOM
and the track number that is to be played
fi rst. All tracks are played back in random
order.
all functions are cancelled. The normal play
mode is resumed.
STOP (stop) button (7).
preset) fl ashes in the display. Use the
SKIP- buttons (8/12) to select the desired track and then
press the PROGRAM button again. The display changes to
memory preset 02.
button and press the PROGRAM button again. Repeat the
procedure until all the desired tracks are selected.
NOTE:
If the maximum space available for the tracks to be pro-
grammed has been reached, the previously programmed
tracks are replaced if further tracks are entered.
PLAY MEMORY appears in the display. With this button
you can also briefl y interrupt the programme.
STOP (stop) button to stop the playback
while retaining the program. The word MEMORY disap-
pears.
GRAM button once and then the II PLAY/PAUSE button.
ton in stop mode. Then keep the
down for approx. 3 sec.
NOTE:
I SKIP+/I
I SKIP+/I
SKIP-
STOP button pressed
27
17.12.2007 12:32:38 Uhr
17.12.2007 12:32:38 Uhr