GRAPHITE 59G019 Manual De Instrucciones página 20

The tool is designed for dry operation only. Use the power tool according to its purpose only.
Inappropriate use.
Do not process materials that contain asbestos. Asbestos is a carcinogen.
Do not process materials that produce flammable or explosive dust. During operation power tool
produces sparks that can ignite produced fumes.
Do not grind with wheels designed for cutting. Cutting wheels work with front edge surface and
grinding with side surface of the wheel can cause damage, and in consequence personal injuries of the
operator.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Cap of the spindle collet sleeve
2. Spindle
3. Guard
4. Spindle lock button
5. Carbon brush cover
6. Switch
7. Display
8. Buttons for control of rotation speed
9. Hanger
10. Flexible casing
11. Flexible shaft handle
12. Sleeve for flexible shaft cord locking
13. Cap of the collet sleeve of the flexible shaft
14. Auxiliary handle
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Flexible shaft
2. Special flat spanner
3. Additional guard
4. Auxiliary handle (attached to the tool)
5. Various accessories
6. Plastic case
INSTALLATION AND DEINSTALLATION OF AUXILIARY HANDLE
You can use minigrinder with or without auxiliary handle (14), according to your needs. Therefore, use
proper guard (3) with high or low flange.
Depending on the work ahead it is recommended to use auxiliary handle and hold the minigrinder
with both hands.
Disconnect the power tool from power supply.
- 1 pce
- 1 pce
- 1 pce
- 1 pce
- 190 pcs
- 1 pce
PREPARATION FOR OPERATION
20