Sunny SF-RB4905 Manual Del Usuario página 17

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE SEAT
Fig. 1
Pull the Brake Handle (No. 49) up to loosen the
Cushion Frame (No. 4) (see Fig 1). Keep your feet
on the floor as leverage, then move the Cushion
Frame (No. 4) to the desired position. Push the
Brake Handle (No. 49) down to lock the seat in
place (see Fig 2).
Fig. 2
HOW TO MOVE THE RECUMBENT BIKE
Hold the Rear Stabilizer (No. 9) and lift the bike until
the transportation wheels on the Front Stabilizer
(No. 3) touch the ground. Now you can move the
recumbent bike to the desired location.
ADJUSTING THE RESISTANCE
Adjust the resistance of the recumbent bike using
72
the Tension Control Knob (No. 72). Increase the
level of resistance by turning the Tension Control
Knob (No. 72) UP (clockwise), decrease the level of
resistance by turning the Tension Control Knob
(No. 72) DOWN (counter-clockwise).
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride,
you must ensure that the recumbent bike is stable. If
you notice that the recumbent bike is unbalanced
during use, you should adjust the Rear End Caps
58
(No. 58) located underneath the Rear Stabilizer
(No. 9) by turning it clockwise.
16

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido