aflamo AV-WM92PRI-S Manual Del Usuario página 8

"L" Shape bracket installation
After make the installation of the wall bracket (s)
A.Remove the silver screw at the bottom of the appliance. (Fig 1-1). Set the screw
aside.
Fig 1-1
Fig 1-2
B.Using the screw previously removed, attached the L-bracket (supplied) to the bottom
of the fireplace box.(Fig 1-2)
Fig 1-3
C.Install the plastic anchor into the dry wall, then install the screw B (supplied) into the
hole of the L-bracket into the wall anchor to secure the fireplace from coming off the
hooks.(Fig 1-3)
www.aflamo.com 8