Adding effects to an image
Notes
•If the "Memory Stick" or PC card is in write protect status, you cannot save an image
in the "Memory Stick" or PC card.
•While saving the image, do not turn off the power or remove the "Memory Stick" or
PC card from the insertion slot. The "Memory Stick" or PC card may be damaged.
To print the edited image
Tap PRINT QUANTITY [+] or [–] to set the copies to be printed and then press
the PRINT button in the Effect main or sub menus. The currently displayed
image will be printed.
Notes
•It may take longer to process an edited image after you press the PRINT button.
•Do not remove the "Memory Stick" or PC card while in the Effect mode. If you do,
the Effect mode ends forcibly and any editing you have done is canceled.
To change the printer settings midway
You can tap [MENU] and change the settings.
GB
30