Dynascan DB-59 Manual Del Usuario página 31

Menu 11: Transmitting DCS --- T-DCS:
Function: Selects transmit DCS.
Options: OFF/105 DCS groups.
Default: OFF.
Menu 12: Transmitting CTCSS --- T-CTCS:
Function: Select transmitting CTCSS.
Options: OFF/50 groups CTCSS/non-standard 60.0-299.9 Hz.
Default: OFF.
Menu 13: Voice prompt --- Voice:
Function: Turn ON/OFF the voice prompt.
Options: OFF/CHI/ENG/etc.
Menu 14: ID code --- ANI-ID:
Function: Display the ID code.
Default: 80808.
Menu 15: DTMF sidetone setting --- DTMFST:
Function: DTMF sidetone allows to turn ON the speaker, the DTMF tone will be heard from
the speaker.
Options: DT-ST: Keypad sidetone will be activated when transmitting.
ANI-ST: Caller ID sidetone will be activated when transmitting.
DT+ANI: Caller ID sidetone and keypad sidetone will be activated when
OFF: Function disabled.
Default: DT+ANI.
Notes:
- When ANI code with less than 6 digits is sent, you must manually add # to
complete, the identity code sent can be compatible with our radio.
- If the DTMF code is less than 6 digits, the radio will automatically fill in #.
Menu 16: Selective signaling coding group --- S-CODE:
Function: Select signaling coding group.
Options: ID+1/ID+2/ID+3 /.....ID+15.
Default: ID+1.
Note:
- The signaling coding group can be pre-programmed by computer.
Menu 17: Scan mode --- SC-REV:
Function: Select the scan mode.
Options: TO/CO/SE.
transmitting.
English - 11 -