Dynascan DB-59 Manual Del Usuario página 33

Menu 24: Offset frequency --- OFF-SET:
Function: Setting offset frequency.
Options: 00.000-99.9975 MHz.
Default: 0.00 MHz.
Menu 25: Channel memory --- MEM-CH:
Function: Store the desired frequency into the specified channel.
Options: 400 channels.
Default: CH-001.
Menu 26: Channel deleted --- DEL-CH:
Function: Delete useless channels.
Options: 400 channels.
Default: CH-001.
Menu 27: Setting alarm mode --- AL-MOD:
Function: Setting alarm mode.
Options: TONE: Sends out the alarm.
CODE: Send out the ID.
SITE: Alarm sound.
Default: Tone.
Menu 28: Setting frequency band --- BAND:
Function: In frequency mode, select the UHF or VHF band.
Options: UHF/VHF.
Default: VHF.
Menu 29: Squelch tail elimination --- STE:
Function: Select squelch tail elimination switch.
Options: ON/OFF.
Default: ON.
Menu 30: Power-on message --- PONMSG:
Function: Select power-on message.
Options: FULL/VOL/MSG.
Default: FULL.
Menu 31: Transmission prompts setting --- ROGER:
Function: Select transmission prompt mode.
Options: OFF/ON.
Default: OFF.
English - 13 -