All manuals and user guides at all-guides.com
Time and date
The time and date will be automatically updated by the broadcasted information; it is no need to set the
clock manually. In the unlikely event that no clock information is received, the display will show "<Time/
Date>". (F14)
Frequency
The frequency of the present station will be displayed.
Audio mode
In FM mode, the display will show if the station being Received is mono or stereo. (F.15)
Alarm ststus
The display will show if the alarm function is being Set to on or off. (F.16)
Ensemble / Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together in a single
frequency. There are national and local multiplexes, local ones contain stations that are specific to that area.
On some occasions you will see a ">" symbol appeared after the name of the station, this indicates that
there are secondary services available to that station. These secondary services contain extra services
that relate to the primary station.
DLS
DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster may include
in their transmissions. The message usually includes information such as programme details ...etc.
ALARM FUNCTION
This radio can be used as a standard "Radio Alarm Clock". You can either set the alarm in standby or in
power on mode.
Important Note: To obtain the best performance of the alarm function, make sure your radio is in AC
operation. It is not recommended to use the alarm function in DC (Battery) operation.
Setting the alarm on / off
To set the alarm, repeatedly press the INFO button until "Alarm status" is displayed, then press the SELECT
button to toggle between alarm ON and OFF. The alarm will automatically repeat each day at the selected
time as long as the alarm status indicates "ON". (F.17) (F.18)
UK - 6