Residual Dangers - battioni Pagani REVOBLOCK 7 Manual De Instrucciones De Uso Y Mantenimiento

3.4 - RESIDUAL DANGERS

The use of high quality materials, along with the technology used, has contributed to obtaining a highly safe
machine. BATTIONI PAGANI S.P.A. has analysed all possible dangers inherent to the machine with the
purpose of eliminating, or at least reducing, the risk of injury for all operators during the life of the machine
since the design phase. In order to reduce the risk associated with residual dangers, the users have been
informed by using warnings and indicating the personal protective equipment to be used.
Here below is a list of residual dangers and the solutions adopted on the part of the user.
Crushing, shearing and dragging dangers are present during machine work phases. BATTIONI PAGANI
S.P.A. signals the absolute prohibition to start the machine before verifying that there are no persons present
in the work space of the machine and the prohibition to start the machine if it is not completely installed and
properly fastened to system piping.
There is a slipping and falling danger during machine maintenance (if the joint is assembled at a certain
height). BATTIONI PAGANI S.P.A. Signals an absolute obligation to carry out any operations at a certain
height using appropriate equipment for accessing the machinery such as ladders and access platforms that
are up to standard code.
There is a danger of parts ejecting from the machine; BATTIONI PAGANI S.P.A. signals the absolute
obligation to respect usage limits indicated in par. 2.7 - TECHNICAL DATA.
Crushing, shearing and dragging dangers are present during machine work phases and in the areas near the
worm screw of the machine. BATTIONI PAGANI S.P.A. has preset a specific fixed protection around the
worm screw; however, it signals the total prohibition for interventions in the area or lubricate while the
machine is running and approach the machine while it is running, especially if wearing loose clothes and
clothing.
REVOBLOCK motorised joint
use and maintenance manual
pag. 43 pag. 43