Visual Message Waiting Indicator (Vmwi); Adjust Handset Microphone Gain; Adjust Headset Ring; Baby Monitor - EnGenius EP800H Manual Del Usuario

2. Press "2" to set BS Selection.
Re：Default setting is "OFF".
3. Press CHANGE left soft key to set the BS Selection ON/OFF.
Re：If BS Selection set "ON＂, when pressing
key, the LCD will show the available bases (Lines),
i.e. 1, 2, 3, 4. Press digit "1", you can access to base
1 to get the line.
Note：When single base, no "Call Manager" setting in "Call Settings".

Visual Message Waiting Indicator (VMWI)

VMWI feature supported the FSK message which received from telephone
line; It will activate a message icon of handset and flash the VOICE
MESSAGE LED of base.
Notes:
1. A subscription to telephone company voice mail service is required.
2. If the handset still indicates the icon even after you have listened all messages,
turn it off by pressing and holding "Caller ID" key on the handset.

Adjust Handset Microphone Gain

In case you will use the handset in different workplace or environment, to
perform better voice quality for the other end, you can adjust the handset
microphone gain to suit for variable place.
a. Press MENU right soft key while the handset is in the standby
mode.
b. Press "5" (Phone Settings), followed by "1" to enter the "Mic. Gain"
menu.
c. Use
or key to scroll the "Standard", "Medium" and
"Low" options.
d. If you are using the handset in quiet environment, like office or
meeting room, the level of "Standard" is recommended.
If you are using the handset in a noisy environment, like factory or
outdoor place, the level of "Medium" or "Low" is recommended.
~47~

Adjust Headset Ring

When using headset, to avoid missing the call due to the ringer emitted from
receiver of headset, you can change the ringer emitting from either handset
speaker or receiver of headset.
a. Press MENU right soft key while the handset is in the standby
mode.
b. Press "5" (Phone Settings), followed by "9" to enter the "Headset
Ring" menu.
c. Select "On", the ringer will be emitted from the receiver of headset;
If select "Off", the ringer will be emitted from handset speaker.

Baby Monitor

You can set any one handset as a "baby unit" to monitor the movement of
baby or older person.
When enabling the baby monitor, the "baby unit" will automatically enter the
monitoring mode via 2-way intercom.
For example, if setting handset A as a "baby unit", when making an intercom
call from handset B, the handset A will automatically enter monitoring mode
without ringing; Also you can hear the all movements around the handset A
via the handset B.
a. Press MENU right soft key while the handset is in the standby
mode.
b. Press "4" (Call Settings), followed by "5" to enter the "Baby
Monitor" menu.
c. Press "CHANGE" to switch ON or OFF (default is OFF).
Re: To avoid any disturbance, during the monitoring, the dedicated
handset will not answer any incoming call, except the intercom.
~48~