EnGenius EP800H Manual Del Usuario página 26

5. Press 4 to set Call Settings:
a. Press 1 to set Dial Prefix:
(1)
Press or
Default = Off.
(2) If "On" is selected, the handset is prompted to enter the prefix
number, up to 14 digits can be entered.
(3) Use Delete right soft key to edit prefix number.
(4) Press SAVE left soft key to confirm the selection.
(5) When this feature is turned on, the LCD will prompt the user
"Dial Prefix? Yes or No" on each outgoing phone call from call
logs, phonebook, and dial-and-send dialing, the current prefix is
also displayed.
Re: the prefix number will be added automatically in front of the
dialed number if press
(6) This feature is useful for access code, calling card, and credit
card calls, etc.
b. Press 2 to Group Select: see Handset Group Subscription on page
33 .
c. Press 3 to set Call Barring: see Call Barring operation on Page 38.
d. Press 4 to set Feature Call: see Feature Call operation on Page 41.
e. Press 5 to set Baby Monitor: see Baby Monitor operation on Page
47.
f. Press 6 to set Call Manager: see Call Manager operation on Page
45.
g. Press 7 to set Area Code:
The area code setting allow calls within local and regional area codes
to be dialed without prefix.
(1) Set Local Area Code :
Press MENU-4-7-1 to set the LAC. Enter the local area code (3-
digit) then press SAVE
(2) Set Country Area Code :
Press MENU-4-7-2 to set the country code. Enter the code (3-
digit) then press SAVE
6. Press 5 to set Phone Settings:
a. Press 1 to set Mic Gain: See Mic Gain operation on Page 46.
to turn on or off the dial prefix feature.
YES left soft key.
left soft key to confirm selection.
left soft key to confirm selection.
~51~
b. Press 2 to set Any Key TALK:
Use CHANGE left soft key to select and confirm "On" or "Off".
Default is "Off".
Re: When set "on", press any key (except
answer the incoming call.
c. Press 3 to set LCD Contrast:
(1)
Use or to scroll through option 1~8. Default is 6.
(2) Press SAVE left soft key to confirm selection.
d. Press 4 to set LCD Backlight:
(1)
Use or to scroll through option 1~3 (1.8 seconds
2.On 3.Off ). Default is "8 seconds".
(2) Press SAVE left soft key to confirm selection.
e. Press 5 to set Name Tag:
(1) Use CHANGE left soft key to select and confirm "On" or "Off".
Default is "Off".
(2) Press SAVE left soft key to confirm selection.
Re: When Set "On", the handset match the caller ID with the phone
book entries; once matched, the LCD screen will display the name
or nickname instead of pure caller ID info (needs Call Waiting
with Caller ID service from local telephone company)
f. Press 6 to set Language:
(1)
Use or to scroll through option (English, Spanish,
French, Italian, German, Dutch, Polish, Czech, Hungary,
Romanian, Turkish).
Default is "English".
(2) Press SAVE (Left) soft key to confirm selection.
g. Press 7 to set Custom Name:
(1) Enter characters using the Character Table and method
discussed in the Phonebook section.
(2) Use
or to move the cursor backward or forward to
insert (to the left of the cursor) or delete (the character above the
cursor, or left of the cursor if cursor is on the right of the last
~52~
and SILENT key) to