Layher 1401101 Instrucciones De Montaje Y Uso página 41

}
TOWER MODELS WITH STABILIZERS, EXTENDABLE
In the case of assembly outdoors, do not exceed the height limit!
Tower models
1401124 – 1401131
Working height
Scaffolding
height
Platform
height
1401126
Tower model
Working height [m]
Scaffolding height [m]
Platform height [m]
Weight [kg] (without ballast)
Ballasting
Indoors
Assembly central
Assembly off-set
Assembly off-set with wall bracing
Outdoors
Assembly central
Assembly off-set
Assembly off-set with wall bracing
When assembling with adjustable mobile beam, it must be fully extended. X = not permissible / possible
For ballasting, use Layher ballast weights, Ref. No. 1249.000, 10 kg each. These are fastened quickly and securely at the right place using the star handle coupling.
Liquid or granular ballast materials must not be used. The ballast weights must be distributed evenly to all ballast fixing points (see pages 20 – 23).
l2, r2  2 ballast weights of 10 kg each must be fastened to the left-hand side of the ladder frame, and 2 ballast weights of 10 kg each to its right-hand side
Example:
L6, R16  6 ballast weights of 10 kg each must be fastened to the left-hand side of the stabilizers, and 16 ballast weights of 10 kg each to its right-hand side
r and R always relate, in the case of off-centre assembly, to that side facing away from the scaffolding; l and L relate to the side facing the scaffolding (see also Section 9, Ballasting, on pages 20 – 23)
1401127 1401128
1401124 1401125
6.5 7.5
5.7 6.7
4.5 5.5
234.7 286.0
0 0
L0 R6 L0 R8
0 0
0 0
L0 R16 L0 R20
0 0
0 = no ballast required
1401129
1401126 1401127 1401128
8.5 9.5 10.5
7.7 8.7 9.7
6.5 7.5 8.5
296.5 347.8 358.3
0 0
L0 R12 L0 R12 L0 R16
0 0
0 0
L0 R28 L0 R34
0 0
Table gives the number of ballast weights each of 10 kg.
1401124
1401130
1401129 1401130
11.5 12.5
10.7 11.7
9.5 10.5
409.6 420.1
0 0 0
L0 R18 L0 R20
0 0 0
X X X
X X X
X X X
1401125
1401131
1401131
13.5
12.7
11.5
471.4
0
L0 R22
0
X
X
X
9