Layher 1401101 Instrucciones De Montaje Y Uso página 51

Additional requirement for special structure with bracket deck surfaces
Tower model
End toe board 0.75 m
Deck 2.85 m
Spring clip
Ladder frame 75/4
Intermediate deck
Aluminium bracket 0.75 m
The tower models, which can be extended with bracket deck surfaces are shown on pages 8 – 10 (Ballasting). When operating with
brackets, the tower may be loaded with 1.5 kN/m
may be assembled. When bracket deck surfaces are fitted, the spindles mustn't be extended. The corresponding working level must be equipped
with complete side protection.
Ref. No. 1 bracket deck surface
1238.075
1241.285
1250.000
1297.004
1339.285
1341.075
2
(scaffold group 2) at one working level only. A maximum of 2 bracket deck surfaces
2
1
4
2
1
4
2 bracket deck surfaces
4
2
8
4
2
4
19