Fr6 Mounting Instructions - Eaton PowerXL DG1 Serie Instrucciones De Montaje

Instruction Leaflet IL040016EN
Effective January 2022

FR6 mounting instructions

Remove the carton from the drive.
Step 1:
Remove the four screws (used to fix the drive to
Step 2:
the pallet) with an M8 or 3/8-inch wrench.
Step 3: Use a hook to lift the drive.
10 EATON www.eaton.com
Attach the drive to the mounting plate with four
Step 4:
M8x20 or 3/8-inch screws and four M8 or 3/8-inch
nuts with an M8 or 2/8-inch wrench. The opening
dimensions on the mounting plate should follow
required dimensions (refer to the drive mounting
template printed on the outside carton).
PowerXL DG1 Series VFD
SCREW:4-M8*20
NUT:4-M8