Intended Use; Safety Guidelines; Electrical Safety - Würth 0702 187 Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
Fuses
Europe
230 V tools with 10-amp power supply

Intended use

Your HKS 86-2 circular hand saw is designed for professional
cutting of wood and plastic. Grinding wheels are available
for cutting metal and stone.
DO NOT USE under wet conditions or in presence of fl am-
mable liquids or gases.
This circular hand saw is a power tool for professional use.
DO NOT ALLOW children to come into contact with the
tool. Supervision is required when inexperienced operators
use this tool.
POSITION OF DATE CODE (FIG. A)
The Date Code (32), which also includes the year of manu-
facture, is printed into the housing.
Example:
2010 XX XX
Production year

Safety guidelines

The defi nitions below describe the level of severity for each
signal word. Please read the operating manual and pay at-
tention to these symbols.
DANGER: Indicates an imminently hazardous situ-
ation which, if not avoided, will result in death
or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous situ-
ation which, if not avoided, may result in minor
or moderate injury.
NOTE: Indicates a practice not related to
personal injury which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fi re.
18
All manuals and user guides at all-guides.com
Safety instructions
General safety warnings for power
tools
WARNING! Read all of the safety warn-
ings and instructions. Failure to follow the
warnings and instructions may result in electric
shock, fi re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE.
In the warnings, the term "power tool" refers to electrical tools
powered by the electrical grid (with a cord) or to electrical
tools powered by batteries (cordless).
1) SAFETY IN THE WORK AREA
a) Keep work area clean and well lit. Messy or
dark areas promote accidents.
b) Do not operate the power tool in explosive
atmospheres where fl ammable liquids, gases
or dust are present. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and observers away when you
operate the power tool. Distractions can cause you
to lose control over the device.

2) ELECTRICAL SAFETY

a) The electrical device's plug must match the
outlet. Never alter the plug in any way. Never
use any sort of adapter plug on earthed
(grounded) electrical devices. Unmodifi ed plugs
and appropriate outlets decrease the risk of electric
shock.
b) Avoid body contact with earthed (grounded)
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed (grounded).
c) Never set electrical devices out in rain or wet
environments. If water gets into the electrical device,
the risk of electric shock increases.
d) Do not overload the cord. Never use the cord
to carry the electrical device or pull the cord
to unplug the device. Keep the cord away
from heat, oil, sharp edges or moving parts.
Damaged or tangled cords increase the risk of electric
shock.
e) When operating an electrical device out-
doors, use an extension cord suitable for
outdoor use. Using cords suitable for outdoor use
decreases the risk of electric shock.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hks 86-2

Tabla de contenido