Product Description And Specifications; Intended Use; Product Features - Würth STP 18-A Traducción Del Manual De Instrucciones De Servicio Original

 Use appropriate detectors to determine if util-
ity lines are hidden in the work area or call the
local utility company for assistance. Contact with
electric lines can lead to fire and electric shock. Damaging
a gas line can lead to explosion. Penetrating a water line
causes property damage.
 Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
 Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the power
tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
 In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
 Use the battery only in conjunction with your
Würth power tool. This measure alone protects the
battery against dangerous overload.
 The battery pack can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short circuit
can occur and the battery pack can burn, smoke, explode
or overheat.

Product Description and Specifications

Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The machine is intended for making separating cuts and cut-
outs in wood, plastic, metal, ceramic plates and rubber while
resting firmly on the workpiece. It is suitable for straight and
curved cuts. The saw blade recommendations are to be
observed.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
For damage caused by usage other than intended, the user is
responsible.

Product Features

The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1 "PowerLight" button
2 On/Off switch
3 Battery pack*
4 Battery unlocking button
5 Thumbwheel for stroke rate preselection
6 Plastic guide plate
7 Base plate
8 Adjusting lever for orbital action
9 Guide roller
10 Saw blade*
11 Clamping lever for saw blade release
12 "PowerLight"
13 Contact protector
14 Handle (insulated gripping surface)
15 Button for charge-control indicator*
16 Battery charge-control indicator*
17 Stroke rod
18 Vacuum connection*
19 Vacuum hose*
20 Splinter guard
21 Steel sliding shoe*
*Some accessories shown or described are not part of
the standard delivery scope of the product.
16