Tabla de contenido
Publicidad
Tool Specifications
Cordless metal circular saw
Article number
No-load speed
Saw-blade diameter x arbour bore
diameter
Max. cutting capacity
– Steel sheet
– Pipes
– Profiles
Weight according to
EPTA-Procedure 01/2003
Battery
Article number
0700 956
Rated voltage
Rated capacity
Number of cells
Weight
Intended Use
The metal circular saw is intended for sawing length-
way cuts in various metal materials, such as metal pro-
files (UniStrut), pipes, drywall profiles, cable ducts,
aluminum profiles, metal sheeting, etc.
For damage caused by usage other than intended, the
user is responsible.
Symbols
Read all safety warnings and all
instructions
Warning
Before any work on the machine,
remove the battery.
Wear safety glasses/goggles.
CE mark
MHKS 28-A
5700 802 X
3200 rpm
174 x 20 mm
Ø 61 mm
max. 61 mm
LI-Ion LI-2-28 V LI-2-28 V
0700 957
0700 957
730
730
28 V
28 V
3.0 Ah
3.0 Ah
1 x 7
2 x 7
1.0 kg
1.0 kg
A battery that is new or has not been used for a longer
period does not develop its full capacity until after
approx. 2 – 3 charging/discharging cycles.
Do not place down the battery on radiators or expose
it to intense sunlight for longer periods; temperatures
above 50 °C cause damage.
Keep the contacts/terminals of the charger and
5 mm
replaceable battery clean. For optimal service life, fully
charge the battery after use.
For maximum service life of the battery, remove it from
the charger after charging.
4.2 kg
When storing the battery for more than 30 days:
Store battery dry and at approx. 27 °C.
Store battery at approx. 30% – 50% of its charging
731
capacity.
28 V
Recharge battery every 6 months.
5.0 Ah
2 x 7
1.0 kg
Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful
to one's health. Touching or breathing-in the dusts can
cause allergic reactions and/or lead to respiratory
infections of the user or bystanders.
Certain dusts, such as oak or beech dust, are consid-
ered as carcinogenic, especially in connection with
wood-treatment additives (chromate, wood preserva-
tive). Materials containing asbestos may only be
worked on by specialists.
• Provide for good ventilation of the working place.
• It is recommended to wear a P2 filter-class respira-
tor.
Observe the relevant regulations in your country for the
materials being worked on.
Maintenance and Cleaning
Before any work on the machine, remove
the battery.
For safe and proper working, always
keep the machine and ventilation slots
clean.
If the machine should fail despite the care taken in man-
ufacturing and testing procedures, repair should be
carried out by a Würth master-Service.
Battery
Dust Extraction
24
Publicidad
Tabla de contenido
