Maximum And Minimum Values - TFA 35.1148 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
TFA_No. 35.1148_Anleitung
09.10.2017
SPHERE – Wireless weather station
Note: The display colour is green if no transmitter is connected.
9.1.2 C2 – Individual colour mode
• You can customize the display colour in this mode. You can change to a variety of colours by pressing the SELECT
SET/DISP button several times. "col" appears on the display while pressing the button.
• If no button is pressed within 3 seconds, the display colour is confirmed and the display returns to normal mode.
9.1.3 C3 – Automatic colour mode
• In this mode the display colour changes automatically in gentle transitions through 600 colour hues.
10. Weather forecast
10.1 Weather trend arrows
• The trend arrows on the display will show whether the atmospheric pressure is increasing or decreasing.
10.2 Weather forecast icon
• The weather station has 3 different weather icons:
sunny
partly cloudy
• The weather forecast covers a range of 12 hours and indicates only a general weather trend. For example, if the current
weather is cloudy and the rain symbol is displayed, it does not mean the product is faulty because it is not raining. It sim-
ply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rain. The accura-
cy is about 75 %.
• The sun symbol also appears on a starry night.
Note:
Please note that the forecast symbol will become more defined in the course of operation. The forecast symbol is active
right from the start, however, the reliability of the forecasts increases with the amount of data collected.
26
17:18 Uhr
Seite 14
rainy
SPHERE – Wireless weather station
11. Developing of atmospheric pressure
• The bar graph indication of atmospheric pressure shows the last 12 hours.
Attention: The weather forecast and the developing of atmospheric pressure will not be transferred to the WeatherHub app.
12. Temperature and humidity

12.1 Maximum and minimum values

• Press the MIN/MAX + button in normal mode.
• The highest indoor temperature is displayed since the last reset.
• Press the MIN/MAX + button again.
• The lowest indoor temperature is displayed since the last reset.
• Press the MIN/MAX + button again.
• The highest outdoor temperature with time of recording since the last reset is displayed.
• Press the MIN/MAX + button again.
• The highest outdoor temperature with date of recording since the last reset is displayed.
• Press the MIN/MAX + button again.
• The lowest outdoor temperature with time of recording since the last reset is displayed.
• Press the MIN/MAX + button again.
• The lowest outdoor temperature with date of recording since the last reset is displayed
• Press the MIN/MAX + button once more, to go back to the current values display.
• Press and hold the MIN/MAX + button for two seconds while the maximum or minimum values are displayed to clear the
recorded readings.
27

Publicidad

Tabla de contenido
loading

Tabla de contenido