Memory Function - Oster POGGM3901M Manual De Instrucciones

.
12 DINNER PLATE
a) Press " CENA " repeatedly until the number you wish appears in the
display, "9.0", "12.0", "18.0" Oz will display in order.
For example, press "
"INICIAR/+30SEG.
b) Press
sounds five times and then turn back to waiting state.
13. PIZZA
a) Press " PIZZA " repeatedly until the number you wish appears in the display,
"4.0", "8.0", "14.0" Oz will display in order.
For example, press " PIZZA" once, "4.0" appears.
"INICIAR/+30SEG.
b) Press
sounds five times and then turn back to waiting state.

14. MEMORY FUNCTION

(1) Press "0/MEMORIA" to choose memory 1-3 procedure. The LED will display 1, 2, 3.
(2) If the procedure has been set, press "
set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "
If press " INICIAR/+30SEG.
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3 minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "0/MEMORIA" twice, stop pressing until the screen displays "2".
b.Press "
TIEMPO DE COCCION
c. Press "
POTENCIA
d. Press "
INICIAR/+30SEG.
display "2". If you press "
memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting state, press "
screen displays "2", then press "
" once, " 0" appears. 9.
CENA
" to cook, buzzer sounds once. When cooking finishes, buzzer
" to cook, buzzer sounds once. When cooking finishes, buzzer
INICIAR/+30SEG.
" again, it will start cooking.
" once, then press "3", "2", "0" in order.
" once, "PL10" displays, then press "8" and "PL8" displays.
" to save the setting. Buzzer sounds once and the screen will
INICIAR/+30SEG.
INICIAR/+30SEG.
ENGLISH-12
INICIAR/+30SEG.
" once to save the procedure.
" again, the procedure will be saved as the
" to run.
" to use it. If not, continue to
"0/MEMORIA
" twice,