Description; Purpose; Overview; Introduction - GreenWorks G24LT25 Manual Del Operario

EN
1

DESCRIPTION

1.1

PURPOSE

This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You cannot use the machine to cut or chop hedges, shrubs,
bushes, flowers and compost.
1.2

OVERVIEW

Figure 1 - 17.
Trigger
1
Lock-out button
2
Upper shaft
3
Auxiliary handle
4
Middle shaft
5
Lower shaft
6
Motor housing
7
Edge guide
8
Trimmer head
9
Guard
10
Release button
11
Positioning hole
12
Knob
13
Battery release button
14
Cut-off blade
15
Tab
16
Spool cover
17
Spool
18
Spool housing
19
Eyelet
20
Anchor hole
21
Guide slot
22
Direction of rotation
A
Best cutting area
B
Dangerous cutting area
C
2

INTRODUCTION

Your product has been engineered and manufactured to high
standards for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of
rugged, trouble-free performance.
3 GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
WARNING
English
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your battery-
operated (cordless) power tool.

3.1 TRAINING

• Read the instructions carefully.
Be familiar with the controls
and the correct use of the
machine.
• Never allow children, persons
with reduced physical, sensory
or mental capabilities or lack
of experience and knowledge
or people unfamiliar with these
instructions to use the
machine. Local regulations can
restrict the age of the operator.
• Keep in mind that the operator
or user is responsible for
accidents or hazards occurring
to other people or their
property.

3.2 PREPARATION

• Before use, check the battery
pack for signs of damage or
aging. If the battery becomes
damaged during use, switch
off the power tool and remove
the battery immediately. Do
not use the power tool if the
battery is damaged or worn.
4