Makita DMP181 Manual De Instrucciones página 10

Using the tapered adapter
Be careful not to inflate the float-
CAUTION:
ing tube too much.
To inflate floating tubes, use the tapered adapter.
1.
Attach the tapered adapter to the air chuck.
► 1. Air chuck 2. Tapered adapter
2.
Insert the tapered adapter into the hole on the
floating tube.
3.
Turn on the tool.
4. Inflate the floating tube by pulling the switch trig-
ger while checking the status of the floating tube.
When inflating a floating tube, do not
NOTICE:
refer to the current pressure value on the pressure
gauge. The pressure gauge does not display an
accurate current pressure value when the pres-
sure of floating tube is less than 35 kPa (5 PSI).
Using the English valve adapter
Country specific
Be sure to select the low speed mode
NOTICE:
when you inflate an object using an English valve
adapter. If other mode is selected, the inflation can-
not be performed properly.
1.
Insert the English valve adapter into the air chuck.
2.
Attach the English valve adapter to the valve stem
while opening the English valve adapter.
1
► 1. English valve adapter 2. Air chuck 3. Valve stem
1
2
2
3
3.
Turn on the tool.
4. Inflate the tire by pulling the switch trigger while
checking the status of the tire.
When using the English valve adapter,
NOTICE:
the pressure gauge will not display an accurate
value due to characteristics of the valve. When
inflating a tire, do not use the value on the pres-
sure gauge, but inflate it by checking the status
of the tire.
If the tool stops before the tire reaches the
desired air pressure, adjust the pressure value,
and then inflate the tire again.
MAINTENANCE
Always be sure that the tool is
CAUTION:
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
Never use gasoline, benzine, thinner,
NOTICE:
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
OPTIONAL
ACCESSORIES
These accessories or attachments
CAUTION:
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
10 ENGLISH