All manuals and user guides at all-guides.com
Taking the photo
Taking a photo:
1
Press the Shutter button with the aiming light on.
After pressing the button, the display (or LED indicator)
reads "Pull Film". If the camera is set to take another picture
on this sheet of film, it reads "Ready" after a 7-second charge
time. If it reads "Ready", take another picture.
Note:
time. To set the number of photos to be taken at once, refer
to Using the camera's buttons and menus
2
To begin processing the film, pull the small white film tab
completely out of the camera, always keeping it
perpendicular to the camera. This ensures that the film in
the camera remains aligned.
Taking pictures
You can take one, two, or four pictures at the same
(page
19).
English 17