All manuals and user guides at all-guides.com
Development Time
Press the Menu button to move from Picture Select to Film
Development Time. The display shows the number of
seconds set for development time. To increase the
development time, press the Up button. To decrease the
development time, press the Down button.
Reset Counts
Press the Menu button to move from Development Time to
Reset Counts. To reset the Counts display (described earlier)
to all zeros, press the Up or Down button.
Language
Press the Menu button to move from Reset Counts to
Language. The display shows the language set for the LCD.
Press the Up or Down buttons to select the language.
Auto Shutoff
Press the Menu button to move from Language to Auto
Shutoff. The display shows the current setting for Auto
Shutoff time. You can program the camera to shut off
automatically when it has been idle for the displayed
amount of time. When it is set to OFF, the camera remains
on until you turn the key to the off position.
Exit
Press the Menu button to move from Auto Shutoff out of the
menu system. The display changes from the camera's menus
to the "Ready" message. Press the Exit button to leave the
menus any time.
Using the camera buttons and menu
English 21