Reset Function; Taking Care Of Your Monitor - Walgreens BM-725W Manual Del Usuario

Reset Function

Your Walgreens monitor will not lose the data stored in the
memory even when you change the batteries. To erase all of the
data in the memory, refer to the instructions below.
Note: Single measurements cannot be erased.
Warning: Resetting the memory will permanently erase all of the
stored data in the memory.
* Press the (M) MEMORY button. (Fig. 3)
* Press the MODE and (Up) button at the same time to clear
all of the stored data. (Fig. 4)
*Fig.3
20
All manuals and user guides at all-guides.com
MODE
MODE
*Fig.4

Taking Care Of Your Monitor

It's important to treat your monitor with care. Here are some
basic tips:
Keep the monitor out of direct sunlight, high humidity and
extreme temperature changes.
Try not to drop it on the floor.
Do not take the monitor or the cuff apart. None of the
monitor's parts are fixable at home. If your monitor needs
repairs see details in warranty section.
Keep the monitor free of dust and other materials. Avoid
getting any part of the monitor or cuff extremely wet. If
the monitor needs cleaning it's best to wipe it with a cloth
slightly dampened with water. It is recommended that you
clean your monitor about once a month.
Always remove the cuff tube from the
monitor with care.
For your safety, do not wrap the cuff around any other
body part other than your arm.
Do not harshly fold or bend the cuff as this may damage it
on the inside.
Do not inflate the monitor's cuff if it is not wrapped around
your arm.
21