Switching Between Fahrenheit Or Celsius; Switching Between 4 Kinds; Of Scan Modes - HoMedics NT17 Manual Del Usuario

SWITCHING BETWEEN
FAHRENHEIT OR CELSIUS
Your thermometer can display results in either
degrees Celsius (°C) or degrees Fahrenheit
(°F). To switch between Celsius and
Fahrenheit, while the unit is on press and
hold both the Human/Object button and the
Memory button for approximately 3 seconds.
This will change the mode to either °C or °F.
Once the thermometer beeps, at which time
the mode has been changed and you may
release the buttons.
SWITCHING BETWEEN
4 KINDS OF SCAN MODE
1. Under power on status, you can press the Human/
Object button to switch different scan mode. There
are 4 kinds of mode which including Human, Object,
Human/Night, and Object/Night mode (in order).
2. The beep sounds will be closed when your choice in
Human/Night mode, and Object/Night mode, and the
Moon symbol will appears on the LCD in both Night
mode.
Human Mode
°F
NOTE:
Each press will comes with a beep sound to ensure
Refer to
the setting is activated. (Except both Night modes).
instruction
°F °F
Object Mode
°F
°F
Human Mode
& Night Mode
°F
10
°F
Object Mode
& Night Mode
°F