Memory Function; Memory Deletion - HoMedics NT17 Manual Del Usuario

MEMORY FUNCTION

Memory Recall:
You can recall up to 30 measurements currently stored
in memory to share with your physician or trained
healthcare professional.
1. When the device is on, press once briefly
on the "MEM button", then pass it again to
show the last measurement accompanied
by " "symbol.
2. The " " symbol or "
with each measurement stored in memory to indicate
whether a person or object temperature was taken.
3. Each press of the same button recalls a previous
measurement, so "

Memory Deletion:

1. Under power on status, you may keep press MEM
Button for more than 3 seconds to delete all the
readings.
2. You will see "--" on display and "sound four short
beeps", that mean all the memories are cleared.
3. Automatically on the 31st measurement:
when the 30 memories have been used up,
any new measurement will be recorded with
" " and the oldest memory deleted
without you having to do anything.
All the readings will be cleared no matter record
in Human mode or Object mode.
Refer to
instruction
" symbol will appear
" then all the way to "
°F
°F
°F
14
°F
".
°F
°F
°F
°F
°F
°F
°F
°F