Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
• Avoid prolonged contact with dust from polishing. Wear
protective clothing and wash exposed areas with soap and
water. Allowing dust to get into your mouth, eyes, or lay on the
skin may promote absorption of harmful chemicals.
Summary of device labels containing safety information
Symbol
Description
Double insulated (Class II)
Use personal protective
equipment
Volts Alternating Current
WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or dust
mask if cutting operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
WARNING: Always wear proper personal hearing
protection that conforms to ANSI S12.6 (S3.19) during
use. Under some conditions and duration of use, noise
from this product may contribute to hearing loss.
WARNING: Some dust created by polishing contains
chemicals known to the State of California to cause can-
cer, birth defects or other reproductive harm. Some exam-
ples of these chemicals are:
• lead from lead-based paints,
• crystalline silica,
•arsenic and chromium from chemically-treated
lumber.
WARNING: Use of this tool can generate and/or disperse
dust, which may cause serious and permanent respiratory
or other injury. Always use NIOSH/OSHA approved
respiratory protection appropriate for the dust exposure.
Direct particles away from face and body.
CAUTION: Use extra care when working into a corner
because a sudden, sharp movement of the polisher may
be experienced when the polishing mop or other
accessory contacts a secondary surface or a surface
edge.
Symbology
Symbol
Description
Hz
Hertz
A
Ampere
No
No-load speed
/min
Per minute
5
Publicidad
Tabla de contenido
