Makita DML805 Manual De Instrucciones página 4

USE PROPER EXTENSION CORD. Make sure your
extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry
the current your product will draw. An undersized cord will
cause a drop in line voltage resulting in loss of power
and overheating. Table 1 shows the correct size to use
depending on cord length and nameplate ampere rating.
If in doubt, use the next heavier gage. The smaller the
gage number, the heavier the cord.
Ampere Rating
More Than Not More Than
0
6
10
12
000300
Save all warnings and
instructions for future reference.
4
Table 1: Minimum gage for cord
Volts
120 V
220 V - 240 V
6
10
12
16
Total length of cord in feet
25 ft. 50 ft.
50 ft. 100 ft.
AWG
18 16
18 16
16 16
14 12
100 ft. 150 ft.
200 ft. 300 ft.
16 14
14 12
14 12
Not Recommended