Optional Accessories - Makita DML805 Manual De Instrucciones

OPERATION
CAUTION:
• This worklight is intended for field work use. Do not use
the worklight for household purpose.
• Always put the tool on flat and stable place. Otherwise
a falling accident may occur.
Adjusting the angle of the worklight
Loosen the knobs on the both side. Adjust the angle of
the worklight. Then tighten the knobs again.
Using with tripod or vise (optional
accessories)
CAUTION:
• Read carefully the instruction manuals of the
accessories before using them with the worklight.
• When using with tripod or vise, do not let the total height
exceed 1.75 m (5' 10").
You can put the worklight on the tripod or vise to facilitate
the operation.
6
1. Knob
1
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off, unplugged,
and the battery cartridge is removed before attempting
to perform inspection or maintenance.
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
Only maintenance work described in this instruction
manual may be performed by the user. Any other work
must be carried out by Makita authorized service centers.
Cleaning
From time to time wipe off the outside (tool body) of the
tool using a cloth dampened in soapy water.
To maintain product
repairs, any other maintenance or adjustment should be
performed by Makita authorized service centers, always
using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita service center.
• Makita genuine battery and charger
• Tripod
• Vise
• Anti-glare film
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
SAFETY and RELIABILITY,