Safety; Proper Use - Fronius MTG 250i Manual De Instrucciones

Safety

Proper use

The MIG/MAG manual welding torch is intended solely for MIG/MAG welding in manual
applications.
Any use above and beyond this purpose is deemed improper. The manufacturer shall not
be held liable for any damage arising from such usage.
Proper use includes:
-
-
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger from electrical current.
This can result in serious personal injury and damage to property.
▶
▶
Danger from electric current due to defective system components and incorrect
operation.
This can result in serious personal injury and damage to property.
▶
▶
Risk of coolant escaping.
This can result in serious personal injury and damage to property.
▶
32
Carefully reading and following all the instructions given in the operating instructions
Performing all stipulated inspection and maintenance work.
WARNING!
All the work and functions described in this document must only be carried out by
technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this device and all
system components.
WARNING!
Before starting work, switch off all devices and components involved and disconnect
them from the grid.
Secure all devices and components involved so they cannot be switched back on.
WARNING!
All cables, leads and hosepacks must always be securely connected, undamaged
and correctly insulated.
Only use adequately dimensioned cables, leads and hosepacks.
WARNING!
When disconnecting a welding torch from the cooling unit or other system compon-
ents, always seal the coolant hoses using the plastic seal attached to the torch.