Safety; Intended Use - Fronius MTG 270i US-Style Manual De Instrucciones

Safety

Intended use

The MIG/MAG manual welding torch is intended solely for MIG/MAG welding in manual
applications.
Any other use is deemed to be "not in accordance with the intended purpose." The
manufacturer shall not be liable for any damage resulting from such improper use.
Intended use also means:
-
-
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in severe personal injury and damage to property.
▶
▶
▶
▶
Danger from electrical current.
This may result in serious injuries or death.
▶
▶
Danger from electrical current.
This can result in severe personal injury and damage to property.
▶
Danger of burns due to welding torch components heated during operation.
▶
26
Following all the instructions in the Operating Instructions
Carrying out all the specified inspection and maintenance work
WARNING!
All the work and functions described in this document must only be carried out by
trained and qualified personnel.
Read and understand this document.
Read and understand all the Operating Instructions for the system components,
especially the safety rules.
Read and understand the attached document entitled "Safety rules".
WARNING!
Before starting work, switch off all the devices and components involved (power
source, wirefeeder, etc.) and disconnect them from the grid.
Secure all devices and components involved so they cannot be switched back on.
WARNING!
All cables, leads, and hosepacks must always be securely connected, undamaged,
correctly insulated, and adequately sized.
CAUTION!
Allow all welding torch components to cool down to room temperature (+25 °C or
+77 °F) before starting any of the work described in these Operating Instructions.