Tools And Parts; Unpack The Air Conditioner - Hisense 12K BTU Instrucciones De Instalacion Y Uso

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
T ools needed
Phillips screwdriver
■
Scissors
■
Level
■
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner .
Failure to do so can result in back or other injury .

Tools and Parts

Tape measure
■
Cordless drill and bit
1 /8"
■
Pencil
■

Unpack the Air Conditioner

Parts supplied
Check that all parts are included in parts package.
A
E
B
D
I
H
S
A Adhesive seal .
I. Lock frame(2)
(for Vinyl-Clad windows)
B Foam seal .
J. Sash lock
C . Side curtains (2)
K. EPDM foam sesl(2)
D.Top rail and
PE foam seal L. 3/4" screws (8)
E. Adhesive seal
M. 1/4" screws (10)
F. Baffle (2)
G. EVA Foam(2)
N. 3/4" Long Flat Head
H. Angle Brackets (2) Bolt and Locknut (2)
NOTE:
The F. Baffle (2) is not provided for
The R.Lock frame is only provided for
The G.EVA Foam(2) is only provided for E-star models,with
E-star LOGO on the control panel.
Remove packaging materials
Remove and dispose of/recycle packaging materials.
■
Remove tape and glue residue from surfaces before turning
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
Do not use sharp instruments, rubbing alcohol, flammable
■
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
Handle the air conditioner gently.
■
■
Remove top rail from the packaging material.
4
C
G
F
J
P
Q
T
O. 1/2" Long Bolt and
Locknut (4)
P. Washer(2)
Q. Left and Right Support
Brackets (2)
R. Lock frame
S. Air conditioner
T. Remote control
12K BTU cooling and heating model.
12K BTU cooling and heating model.
R