Using The Unit - Stihl HL 45 Manual De Instrucciones

English
WARNING
Never repair damaged cutting attach-
ments by welding, straightening or
modifying the shape. This may cause
parts of the cutting blades to come off
and result in serious or fatal injuries.
Keep the cutting blades sharp. Tighten
all nuts, bolts and screws, except the
carburetor adjustment screws, after
each use.
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
Store the power tool in a dry and high or
locked location out of reach of children.
Before storing for longer than a few
days, always empty the fuel tank. See
chapter "Storing the machine" in this
manual.
12

Using the Unit

Cutting Season
Observe country-specific or municipal
rules and regulations for cutting hedges.
Do not use your hedge trimmer during
rest periods cutomary in the
neighborhood.
Preparations
Use lopping shears to cut out thick
branches first.
Using a shoulder strap makes operation
much easier – see "Special
Accessories".
Cutting Sequence
Cut the sides of the hedge first, then the
top.
If a radical cut is necessary, cut a little at
a time in several stages.
Recommendation:
Only cut hedges that are no more than
chest height.
Disposal
Do not throw cuttings into the garbage
can – they can be composted.
Vertical cut
Swing the cutter bar up and down in an
arc as you move along the hedge – use
both sides of the cutting blades.
Any working position above head height
is tiring. To minimize the risk of
accidents, work in such positions for
short periods only.
HL 45