Cleaning; Installing The Cabinet - Electrolux ERF37800X Manual De Instrucciones

Installation of distance
Assemble the attached distance on
the back side of the panel according to
the illustration.

Cleaning

Wash the inside of the cabinet using
lukewarm water, a mild washing-up
detergent and a soft cloth.

Installing the cabinet

Make sure that the power plug is not
squashed or damaged by the back of
the product.
· A damaged
overheat and cause a fire.
Do not place heavy articles or the
product itself on the power cord.
· there is a risk of a short circuit and
fire.
If the power plug socket is loose, do not
power plug may
insert the power plug.
· there is a risk of electric shock or fire.
To obtain the best performance from the
cabinet, ensure:
· the cabinet is placed in a dry, cool
place and is not exposed to direct
sunlight.
· the cabinet is not placed close to a
source of heat, e.g. a cooker or
dishwasher.
· the cabinet is level. The cabinet
should not lean against any wall. If
necessary adjust the feet using the
adjustment spanner supplied.
· there is good air circulation around
the cabinet and that the air channels
below and behind the cabinet are not
blocked. The ventilation space above
the cabinet must be at least 4 cm.
The ventilation space can either be
a) directly above the cabinet, or
b) behind and above the top cupboard.
In this case, the space behind the
cupboard must be at least 50 mm deep.
a)
b)
50mm
20