Use Of The Fridge Compartment; Measuring The Temperature - Electrolux ERF37800X Manual De Instrucciones

J. Temperature adjustment buttons/thermostat Used to set the temperature
(colder).
K. Yellow indicator lamp Lights when Fast Freeze is operating.
L. FAST FREEZE button Used to switch the Fast Freeze feature on and off.
M. Red warning lamp Lights when one of the alarms in the cabinet has been
triggered.
N. Alarm shut-off button Used to turn the audible alarm off.

Use of the fridge compartment

First switch on
Switching on:
Switch on the fridge by pressing the
power switch.
+
Setting the temperature
Press the buttons until the desired
temperature flashes in the temperature
display (The temperature can be set
between +2°C and +8°C.)
"+" raises the temperature.
"-" lowers the temperature.
+
Allow the cabinet to run for a period of
24 hours whenever the temperature
setting is changed. This will allow the
temperature to stabilise inside the
cabinet.
It is not necessary to reset the
temperature when the cabinet is
switched on after it has been out of
use. The thermostat recalls the
previously set temperature.
Attention!
Difference between the temperature
displayed and temperature setting is
normal. Especially when:
-
ACTION COOL
-
ACTION COOL
- a new setting has recently been
selected
- the door has been left open for a
long time
- warm food has been placed in the
compartment.
A suitable temperature inside the fridge
is approx. +5°C. Storage temperature
in the cabinet is even on all of the shelf
levels.
+
--
--
--
+
Meat, fish and milk should be put in
the coldest part of the cabinet.

Measuring the temperature

If the temperature is measured using a
standard, single thermometer, this
should be put in a glass of water
centrally placed inside the cabinet.
This will reflect the temperature inside
the food products. Do not place the
thermometer hanging or lying directly
on the shelf.
+
--
+
8