Still Image Recording - JVC GZ-HD320 Manual De Instrucciones

Still Image Recording

Slide the mode switch to select
#
(still image) mode.
To view the last recorded image

A
Select after shooting.
$
Selecting during playback deletes that
image.
To change the image quality

Change the settings in [IMAGE QUALITY].
To change the image size

Change the settings in [IMAGE SIZE].
To record still images continuously

Set to [CONTINUOUS SHOOTING] in
[SHUTTER MODE].
NOTE
•
DIS (Digital Image Stabilizer) does not function during still image recording.
•
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off
automatically to conserve power.
•
The sides of still images recorded in 16:9 size may be cut off when printed. Check whether 16:9
size prints can be printed at your local print store.
•
If the LCD monitor is turned upside down,
monitor is in the normal position.
Press PLAY/REC to select the
recording mode.
Press and hold SNAPSHOT
halfway.
?
The indicator becomes green when
the captured image is focused.
Press SNAPSHOT fully to take a
still image.
To turn on the face detection mode

Select .
is not displayed. Change the setting when the LCD
1
EN