Connections; Connecting Input Terminals - PIONEER DJ DJM-250MK2 Manual De Instrucciones

Connections

Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
Connect the power cord after all the connections between devices have been completed.
Be sure to use the included power cord.
Refer to the operating instructions for the component to be connected.
 Connect this unit and the computer directly using a USB cable.
 Use USB cables that conform to USB 2.0.
 USB hubs cannot be used.

Connecting input terminals

Rear panel
Analog player
AC adaptor
Analog player
Pioneer DJ's DJ player
To power outlet
Pioneer DJ's sampler, etc.
Microphone
Computer
9
En