Beep; Equipment Information; Exit; Spectrum Analyser Operating Mode - Promax PROLINK-3 Premium Manual De Instrucciones

4.9.4.19

Beep

This function allows the user to switch the audible indicator ON and OFF. To do
this, first select the TV mode functions menu, then choose the Beep function using the
rotary selector [4] and press. The monitor will show the BEEP screen and by turning the
rotary selector it will be possible to select between Beep ON or Beep OFF. To validate
press it again.
4.9.4.20

Equipment Information

This function displays information on the instrument. To activate it, press the
rotary selector [4] while in the TV operation mode. Turn the rotary selector [4] to the
Equipment Info. function and press. The monitor will show the EQUIPMENT INFO.
screen listing several informations such as the instrument serial number (Serial
Number), the version of the control program (Version), etc.
To exit the function press the rotary selector [4].
4.9.4.21

Exit

Exits from the TV functions menu.
4.10

Spectrum Analyser Operating Mode

The Spectrum Analyser mode allows the user to discover the signals present in
the frequency band in quickly and easily and to make measurements at the same time.
To select it press key
in the next figure.
Page 76
[21]. The monitor will show a picture like the one described
Figure 39.- Spectrum Analyser mode.
USER'S MANUAL. PROLINK-3/3C Premium
06/2005