Search Level; Teletext; Diseqc Command Generator - Promax PROLINK-3 Premium Manual De Instrucciones

4.9.4.16

Search Level

Use this function to modify the threshold level of the automatic station search. To
change the level place the cursor on the Search level field and press the rotary selector
[4]. The monitor will display a window showing the current value of the search level, to
alter it press key
automatic on entering the second digit.
4.9.4.17

Teletext

When the Teletext function is selected, Teletext information appears on the
monitor if a transmitter with this information is tuned. The first page to appear on the
screen is always page 100. If Teletext data is received, a counter located on the upper
edge of the screen indicates the page that is being processed. To change active page
press key [31] and introduce the new number using the numeric keyboard (third
digit acts as confirmation).
If the page requested is not included in the Teletext service of the transmitter, the
search will continue indefinitely. In such a situation the user can halt the search
process, either by entering a new page number or by exiting the Teletext function
pushing any control relative to another function.
The Teletext function is especially valuable for the final optimization process in TV
installations. Any interference or reception through indirect beams generates digital in
the digital information of the Teletext, which are highly visible as erroneous characters
on the screen.
4.9.4.18

DiSEqC Command Generator

5
DiSEqC ('Digital Satellite Equipment Control') is a communication protocol between
the satellite receiver and the accessories of the installation (switches, LNBs, etc.)
proposed by Eutelsat, with the aim to standardize the diversity of switching protocols (13 -
15 — 18 V, 22 kHz, 60-400 Hz) and to satisfy the demands of the digital TV installations.
To define and/or to send a DiSEqC commands sequence, from the TV operation
mode, press the rotary selector [4], select the DiSEqC function and press it again. A
screen like next one will appear:
DiSEqC TM is a trademark of EUTELSAT.
5
Page 72
[31] and enter the new value on the keyboard. Confirmation is
USER'S MANUAL. PROLINK-3/3C Premium
06/2005