Configuring The Datalogger Function - Promax PROLINK-3 Premium Manual De Instrucciones

As you can see in the previous figure, the main screen of the Datalogger function
has three functions: Config (Configuration), Run and Exit. Below these three functions
is the measurements matrix, three columns and five rows are simultaneously displayed
(in the previous figure the datalogger has three stored measurements, one for each of
the first three memories).
To access the various screen functions or fields press key

4.9.4.4.1 Configuring the Datalogger Function.

The configuration menu of the Datalogger function allows you to choose between
taking and/or printing measurements, programming the PROLINK-3/3C
take measurements at a pre-determined time, defining the time interval between
measurements, erasing all measurements stored in the Datalogger function, and
automatically deactivating all the measurement configurations.
To define the configuration of the Datalogger function press key
repeatedly until you have selected the Config field and then press the rotary selector
[4]. The configuration screen of the Datalogger function will then appear.
Figure 31.- Configuration of the DATALOGGER function
Page 62
Figure 30.- DATALOGGER screen.
USER'S MANUAL. PROLINK-3/3C Premium
[31] repeatedly.
Premium to
[31]
06/2005