Cameo F2 T POLE OPERATED Manual De Usuario página 9

Fan = Adjusts fan speed
Factory Reset = resets to factory
setting
Dimmer curves
linear
DMX value
SYSTEM INFORMATION (System Info)
Press the encoder to access the main menu. Rotate the encoder to select the menu item "System info" (left arrow) and confirm by pushing the
encoder. This will take you to the submenu for selecting the submenu items (see table, rotate the encoder to select and push the encoder to confirm
selection). Now select the arrow symbol for "back" at the top of the submenu. Push the encoder and access the main menu in the same way to
return to the main display. The main display is activated automatically if no input is made within approximately 30 seconds.
---------------- Me
nu ----------------

DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
System Info
Firmware = Displays device firmware
Temperature = Displays temperature of LED unit
Operation Hours = Displays operating time

Auto
Max Intensity
Low Noise

Reset Now!
exponential logarithmic
DMX value
DMX value
Back
Automatic fan speed control
Maximum fan power for maximum brightness
Extra quiet fan with reduced brightness
Back
reset to factory settings
S-curve
DMX value
Main CPU Vx.xx
 Back
LED xx°C / xx°F
Unit °C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
xx:xx h Displays total operating time in hours and
minutes
9