Radio; Starting Procedure; Searching By Pty Information; Storing The Strongest Broadcast Frequencies - Pioneer AVH-X5850BT Manual De Instrucciones

Radio

Displays the preset channel list.
Select an item on the list ("1" to "6")
to switch to the preset channel.
Selects the FM1, FM2, FM3
or AM band.
Radio
1
6/10
2
FM1 AM
Abcdefghi
3
Abcdefghi
4
Abcdefghi
5
000.00
6
MHz
Performs manual tuning.
Performs seek tuning or
HOLD
non stop seek tuning.
Releasing the key in a few seconds, skips
to the nearest station from the current
frequency.
Keeping holding the key for a long
seconds, performs non stop seek tuning.
Recalls the preset channel
stored to a key from memory.
Stores the current broadcast
HOLD
frequency to a key.
Searches for a broadcast by PTY information.
 Refer to Searching by PTY information on page
18
p By pressing or , you can also switch the preset
channels.
p By pressing and hold or
also perform seek tuning.
p By keeping touching and holding
non stop seek tuning. Touch again to cancel.
18

Starting procedure

1 Display the "AV source selection" screen.
21 48
2 Touch [Radio].
The "Radio" screen appears.

Searching by PTY information

You can tune into a station using PTY (Programme Type
Identification) information.
p This function is available when the FM tuner is selected.
1 Touch
2 Touch
The following items are available:
News&Info (default), Popular, Classics, Others.
3 Touch
 If you touch [Cancel], the searching process is
cancelled.
Storing the strongest broadcast
frequencies
The BSM (best stations memory) function automatically stores
the six strongest broadcast frequencies under the preset tuning
keys "1" to "6".
p Storing broadcast frequencies with BSM may replace those
you have already saved.
p Previously stored broadcast frequencies may remain stored
if the number of frequencies stored has not reached the
limit.
1 Touch
2 Touch
While the message is displayed, the six strongest broadcast
frequencies will be stored under the preset tuning keys in order
of their signal strength.
 If you touch [Cancel], the storage process is
and release, you can
cancelled.
or , you can perform
.
or to select the item.
to start searching.
.
to begin a search.
Displaying the "Radio settings"
screen
1 Display the "System" setting screen.
2 Touch [AV Source Settings].
3 Touch [Radio settings].

Tuning into strong frequencies

p This setting is available only when "Radio" is selected as the
source.
Local seek tuning allows you to only tune into those radio sta-
tions with sufficiently strong signals.
1 Display the "Radio settings" screen.
 Refer to Displaying the "Radio settings" screen on page 18
2 Touch [Local].
3 Touch the item.
 Off (default):
Turns the seek tuning setting off.

Level1 to Level4:
Sets the level of sensitivity for FM to Level1 to Level4 (for
AM Level1 or Level2).
p The FM "Level4" (AM "Level2") setting allows reception of
only stations with the strongest signals.
Setting the FM or AM tuning
step
You can switch the seek tuning step for the FM band, and the
seek/manual tuning step for the AM band.
p For the FM band, the manual tuning step is fixed to 50 kHz.
1 Turn the source off.
 Refer to Selecting a source on page 10
2 Display the "Radio settings" screen.
 Refer to Displaying the "Radio settings" screen on page 18
3 Touch [FM Step] or [AM Step] to switch the
tuning step.
The following items are available for each setting: