Adjusting The Lcd Panel Angle; Inserting/Ejecting/Connecting Media; On First-Time Startup - Pioneer AVH-X5850BT Manual De Instrucciones

Basic operation
injury in the event of an accident.
CAUTION

Do not open or close the LCD panel by force. It may cause
a malfunction.
 Do not operate this product until the LCD panel has
completely opened or closed. The LCD panel may stop at
that angle for safety.
 Do not place a glass or can on the open LCD panel.

Adjusting the LCD panel angle

X5850BT X5850TV
1 Press the button.
2 Touch or to adjust the angle of the
LCD panel.
3 Touch .
Returns to the previous screen.
Inserting/ejecting/connecting
media
CAUTION
Do not insert anything other than a disc into the disc-loading
slot.
Inserting and ejecting a disc
Inserting a disc
X5850BT X5850TV
1 Press the button.
2 Touch to open the LCD panel.
3 Insert a disc into the disc-loading slot.
Ejecting a disc
X5850BT X5850TV
1 Press the button.
2 Touch to open the LCD panel.
3 Remove the disc, and press the
8
Inserting a disc
1 Insert a disc into the disc-loading slot.
Ejecting a disc
1 Press
Plugging and unplugging a USB stor-
X4850DVD age device
p This product may not achieve optimum performance with
some USB storage devices.
p Connection via a USB hub is not possible.
p A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
1 USB cable
2 USB storage device
Check that no data is being accessed before pulling out the
USB storage device.
X4850DVD

On first-time startup

1 Start the engine to boot up the system.
The "Select Program Language" screen appears.
p From the second time on, the screen shown will differ
depending on the previous conditions.
2 Touch the language.
X4850DVD
3 Touch
The "Location Setting" screen appears.
4 Touch the item to select the using location.
button.
5 Touch
X2850BT X1850DVD
X2850BT X1850DVD
button to eject a disc.
1
2
.
.
The "Speaker Mode Settings" screen appears.
6 Touch the speaker modes.
 Standard Mode
4-speaker system with front and rear speakers, or a
6-speaker system with front and rear speakers and
subwoofers.

Network Mode
3-way system with a high range speaker, middle range
speaker and subwoofer (low range speaker) for reproduction
of high, middle and low frequencies (bands).
WARNING
Do not use the unit in standard mode when a speaker system
for 3-way network mode is connected to this unit. This may
cause damage to the speakers.
7 Touch [OK].
The "Smartphone Setup" screen appears.
8 Touch the item.
 Refer to Information on the connections and functions for
each device on page 17
9 Touch .
The top menu screen appears.
p Once the speaker mode is set, the setting cannot be
changed unless this product is restored to the default
settings. Restore the default settings to change the speaker
mode setting.
 Refer to Restoring the default settings on page 48
Switching the speaker mode
To change the speaker mode, you need to restore this product to
the default settings.
1 Restore the default setting.
 Refer to Restoring the default settings on page 48