Setting The Alternative Frequency Search; Setting The Auto Pi Search; Limiting Stations To Regional Programming; Receiving Traffic Announcements (Ta) - Pioneer AVH-X5850BT Manual De Instrucciones

Radio
FM Step

100kHz(default)

50kHz
AM Step
 9kHz (default)
 10kHz
Setting the alternative fre-
quency search
When the tuner cannot get a good reception, tunes to another
broadcast station that supports the same programme in the
current network.
The default setting is "Off".
1 Display the "Radio settings" screen.
 Refer to Displaying the "Radio settings" screen on page 18
2 Touch [Alternative FREQ] to switch "On" or
"Off".

Setting the Auto PI search

When you switch to the broadcast station containing RDS data,
searches for the same PI (Programme Identification) code broad-
cast station from all frequency band automatically.
The default setting is "Off".
1 Display the "Radio settings" screen.
 Refer to Displaying the "Radio settings" screen on page 18
2 Touch [Auto PI] to switch "On" or "Off".
p Even if you set to "Off", the PI search is automatically per-
formed when the tuner cannot get a good reception.
Limiting stations to regional
programming
You can switch whether the area code is checked during the
auto PI search.
The default setting is "On".
1 Display the "Radio settings" screen.
 Refer to Displaying the "Radio settings" screen on page 18
2 Touch [Regional] to switch "On" or "Off".
Receiving traffic announce-
ments (TA)
The traffic announcement can be received from the last selected
frequency, interrupting the other sources.
The default setting is "Off".
1 Display the "Radio settings" screen.
 Refer to Displaying the "Radio settings" screen on page 18
2 Touch [TA Interrupt] to switch "On" or "Off".

Receiving news announcements

The news can be received from the last selected frequency,
interrupting the other sources.
The default setting is "Off".
1 Display the "Radio settings" screen.
 Refer to Displaying the "Radio settings" screen on page 18
2 Touch [News Interrupt] to switch "On" or "Off".

Receiving alarm broadcasts

The alarm broadcast can be received from the last selected
frequency, interrupting the other sources.
The default setting is "On".
1 Display the "Radio settings" screen.
 Refer to Displaying the "Radio settings" screen on page 18
2 Touch [Alarm Interrupt] to switch "On" or
"Off".

TV tuner

X5850BT X4850DVD X2850BT
Hides the tuner control keys.
To display again the keys, touch
anywhere on the screen.
Displays the Electronic
Programme Guide.
TV
21 48
6/10
1 abcdefghi
abcdefghi
abcdefghi
2
EPG Menu
abcdefghi
3
1/3
abcdefghi
4
005
CH
abcdefghi
5
abcdefghi
6
Switches the preset channels
upward or downward.
Displays the TV tuner menu.
Recalls the preset channel.
p By pressing or , you can also switch the preset
channels.
p Changing the wide screen mode.
 Refer to Common operations on page 47
You can control a TV tuner, such as GEX-1550DTV (sold
separately).
 The following description is differ from the TV tuner opera-
tion manual.

Starting procedure

1 Display the "AV source selection" screen.
X1850DVD
Full
19